Phone: (302) 684-3197  Fax: (302) 684-0643 | Email   
Atlantic Sscreen &  MFG Co.
Atlantic Sscreen &  MFG Co.

Search Catalog :
GO
Use trailing wildcard (*) for broader results

All Products

#### Catalog

Flush Joint Screens & Casings
Special Application
Well, Plastic & SS Screens
Tubing
PVC Fittings
Sampling Equipment
Manholes
Glue, Primers
Filter Sock
Hole Plug, Bentonite, Sand Gravel
Accessories, Well Seals, & Jet Adapters
In Line Static Chemical Mixer
Absorbent
Caps – Locking & Non-Locking
Cleaning Detergents
Well Cleaning Products
Well Monitoring Equipment
Clear PVC Pipe
Valves
Internal Pipe Cutters
Auger Plug, Pipe Clamp, Centralizers
Traps, Packers & Seals
 
Search Catalog
      GO   
 All Categories    Fluid Level Measurements in Liquid Storage Tanks
All Categories > Sampling Equipment – Bailers, Meters & Probes > Depth Indicators and Water Meters > Item # pn-2584  

Item # pn-2584


    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

The heron ull-T-mate Ullage meters are the ideal instruments for monitoring the fluid levels in storage tanks above or below ground. The instruments detect the surface level of all fluids such as oil, fats, detergents, acids and alkaline at temperatures as high as 100°C. The Heron ull-T-mate uses the highest quality, accurate (USS-GGG-T-106E) tapes. The tapes are jacketed in Kynar giving exceptional chemical resistance. Power is supplied by alkaline batteries housed in the hub of the instrument providing over 600 hrs of continuous use.




 Specifications   Features   

Material

Stainless steel

Diameter

3/4 in

Length

3 1/2 ft

Size

8 x 9 in
20.5 x 23
cm

Weight

3 1/2 lbs
1.6
kg

Tape Length

50 ft
15
m

Battery Type

3 x AAA alkaline

Operation

Operation of the Heron ull-T-mate is easy, press the start button on the hub of the unit. The unit is now active for 5 minutes before switching itself off. Simply lower the probe into the tank, when probe touches the liquid the red light and buzzer give a rapid pulsing signal. The depth to the liquid is read off the tape. The tape is graduated in 1/100th ft or l/mm allowing high accuracy readings to be taken.

Options

Also Available for Interface Measurements
The ull-T-mate I.F.

This unit detects the interface between conducting and non-conducting fluids such as oil and water.